Why Odhav's Moulders and Machine Shops Switch
Odhav is the mixed estate of the three. Alongside roughly fifty dye and chemical units it carries a dense population of injection moulders, mould and die makers, engineering fabricators, metal-working shops and electrical-equipment manufacturers. That mix means the estate has two different costing problems living side by side.
For the moulders, material is bought by the kilo and sold by the piece, and the conversion factor is not stable — it changes with the mould, the cavity count, the polymer grade and how much regrind is blended back. A single per-piece material rate cannot represent that, which is why moulding shops running on Tally rarely know their true part cost. We wrote the long version of this in the guide to tracking material wastage in injection moulding.
For the machine shops and fabricators, the problem is the opposite: every job is different, drawings get revised mid-order, and the cost sits in labour and machine time rather than material. OEMup handles both — BOM by mould, cavity and grade for the moulders, versioned job BOMs and job cards for the fabricators, in the same instance.
OEMup runs entirely on the cloud — no server, no local install, no IT team. Reach us on +91 63582 51676 or WhatsApp.
What Runs in Odhav GIDC
The estate is not one industry, and each part of it maps to a different capability:
Plastic Moulding
BOM by mould, cavity and grade, with shot-weight costing and regrind blend ratio. Plastics ERP →
Mould & Die Making
Make-to-order job BOMs, versioned drawings and job-wise costing. BOM management →
Engineering Fabrication
Plate and section consumption, job cards and offcut tracking. Fabrication ERP →
Electrical Equipment
Assembly BOMs, serial traceability and despatch documentation. Inventory →
GST, E-Invoice & Scrap Sales — Built In
Odhav units bill a mix of finished goods, job work and scrap. OEMup handles all three:
- HSN-wise GST invoices with correct CGST/SGST and IGST.
- E-invoice IRN + QR in one click, ready for buyers and portals.
- Scrap and regrind sales invoiced properly rather than disposed of informally — plastic waste and parings fall under HSN 3915 and are a taxable supply.
- E-way bills straight from the invoice for despatch. See e-way bill software →
- Job-work challans and ITC-04 for moulding, plating or machining sent out. See job work & ITC-04 →
See OEMup on your own numbers
Book a free demo — bring a Tally backup or an Excel BOM and we’ll show a costed manufacturing order and trial balance live. No card required.
Book Free Demo →Already Live with Indian Manufacturers
OEMup is in production with real manufacturers — Alfa Pumps, Chemoro, Airmake, Innox and Orfom — running daily production, inventory and GST. See why we built OEMup, or the best manufacturing ERP in India comparison.
Odhav and the Estates Around It
Odhav sits between the chemical weight of Vatva GIDC and Naroda GIDC and the engineering belt further out at Changodar. All of them are inside Ahmedabad, where OEMup is built and supported, and part of the wider Gujarat manufacturing base.
Odhav GIDC ERP — Frequently Asked Questions
Which ERP works for an injection-moulding unit in Odhav?
Can OEMup track regrind properly?
Does it suit a mould and die maker rather than a moulder?
Can one instance cover moulding and fabrication in the same unit?
Related: ERP software in Ahmedabad · ERP software in Gujarat · Best manufacturing ERP · All locations